BR1-1 Bead Remover T3C

BR1-1 Bead Remover T3COverview The BR1 1 Bead Remover quickly removes the bead from sidewalls that have been separated from a tire with EECO's Sidewall Remover. The machine is semi automatic, simply: Place the sidewall over the upper roller Press the air button. Remove sidewall and bead The bead will then be cut from the sidewall at approximately 1 inch from the inside diameter of the bead. When the cut is complete, the button is released and the pieces can be removed.

) are standard "off the shelf" parts and available locally

Floor space: 33” x 33” (84cm x 84cm)

Re-tighten the 2 blade holder thumbscrews

The cutting surface is a pair of standard Extra Heavy Duty Utility Blades

The SR1-1 Sidewall Remover simultaneously removes both sidewalls from a passenger or light truck tire in one operation that takes less than 5 seconds

It can be resharpened multiple times before replacing as long as at least 1" (2

2-position

Heavy duty steel wheel used in EECO's SR1-1 Sidewall Remover to support tires while allowing them to rotate

the button is released and the pieces can be removed

Removing the curved edges allows tread bands to lay flat and be manipulated in ways that were previously impractical

The BR1-1 Bead Remover uses multiple bearings in various sizes

used in the EECO's SR1-1 Sidewall Remover