Fasco D3325CW Ventilation Motor, 1/25 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO Spa Pumps

Fasco D3325CW Ventilation Motor, 1/25 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO Spa PumpsFan and Blower Duty Motor 3. 3" Diameter Shaded Pole Thermally Protected Open Shaft End and Lead End, Enclosed Shell, Air Over Class B Insulation, 40C Ambient Ball Bearing 5 16" Diameter Shaft with Flat 23" Leads Extended Studs Shaft End and Lead End, Belly Band Mount (Belly Band Not Included) Additional Information Thermal ProtectionThermally Protected Speed1550 rpm Current1. 70 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation

25 MOUNTING C-FACE MOTOR TYPE FHP OPPOSITE END BEARING 6203 SHAFT END BEARING 6203 AMBIENT 50 ROTATION CW LEAD END SERVICE FACTOR 1 RUNCAPMFD 50 RUNCAPVOLTS 370 SHIPPING WEIGHT 28 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS F KVA CODE LETTER G FULL LOAD AMPS PRIMARY 11

Frame 286T Output 30 HP (22 kW) Number of Poles 4 Frequency 60 Hz Rated speed 1765 rpm Slip 1

35 LB-FT Starting Current 12

Rated current 50 A Reference CWM Main contact 2 NO Control voltage 180-208V 50Hz/208-240V 60Hz Terminal type Screw Attributes

15 STARTCAPMFD N\A SHIPPING WEIGHT 47 BREAKDOWN TORQUE 465 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 358 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER L LOCKED ROTOR AMPS 24

Model_Number FK28 PRODUCT NAME 125 HP - TEFC - 1790 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 125 KILOWATTS 93

lb Locked rotor torque 220 % Breakdown torque 280 % Locked rotor time 28s (cold) 16s (hot) Moment of inertia (J) 1

lb Locked rotor torque 280 % Breakdown torque 320 % Locked rotor time 21s (cold) 12s (hot) Moment of inertia (J) 9

Catalog Number XM25222T Enclosure XPFC Frame 256T Frame Material Iron Frequency 50

Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230/460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 2 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC Electric Motors

weight³ 3208 lb Efficiency

657 lb-ft2 Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Frame Prefix D Heater Indicator No Heater Insulation Class F Lifting Lugs No Lifting Lugs Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 14 AWG Mounting Arrangement B35 Overall Length 15