SG Special - White Pearl White/Black/White 3 ply Lamination 50th Anniversary Jazz Bass

SG Special - White Pearl White/Black/White 3 ply Lamination 50th Anniversary Jazz BassThis pickguard was taken from a vintage USA Gibson SG Special model from the 1960's 1970's. The original vintage version and the current USA Gibson 60's Tribute SG are NOT the same pickguard but we now have the tooling for the 2010 to current USA Gibson SG 60's Tribute which is available through selection of the drop down menu. Neither of these pickguards will fit an Epiphone SG. Made from 3 ply white pearl black white plastic material, 2. 28mm thick.

Straight: 3/16″ ( 4

a nut does not come with the neck and would need to be ordered separately

rough up the top side of the metal side tab on the pickup as well as the underside of the pickguard and then use a contact adhesive such as Evo-stik

This gives you the same added string definition and note articulation the vintage guys crave and was also used by some of the greatest USA guitar manufacturers from the golden era of guitar building

resistance than the JT the JB is more like a bright version of a telecaster neck pickup

PLEASE NOTE: you will have to remove the housing for the passing lane switch from your original pickguard and use it on the replacement guard that we supply

On top of this

Post Top Width =

This replacement pickguard is made to fit the Gibson Reverse Firebird produced from 2010-2018

A high density sustain block means greater mass which means less string vibration transmitted to the springs and more in the bridge where it belongs

Humbucker baseplate in nickel silver with straight (flat) mounting tabs

These bridges &